The following procedures are available in the Solaris 10 release and are covered in the System Administration Guide: Security Services.

• How to Configure syslog Audit Logs — How to select the type of data that is stored in audit logs.
• How to Change a User's Audit Characteristics — How to audit users only, not the system. See example 29-8.
• How to Audit Roles — How to audit the activities of all roles.

• x86: How to Print a Report on Disk Sets Available for Import — Beginning with SX 6/06, you can import partial disk sets in Solaris Volume Manager. This procedure shows how to check the status of disk sets in your system. Based on the status, you can then follow the recommendations provided by Solaris Volume Manager.
• x86: How to Create a RAID-1 Volume From the root (/) File System — How to use GRand Unified Bootloader (GRUB) to create a RAID-1 volume from the root file system on an x86 machine. GRUB has replaced the Device Configuration Assistant (DCA) in the Solaris OS. Available in Solaris Express 8/06.

The following procedures are available in the Solaris 10 1/06 release and are covered in the System Administration Guide: Advanced Administration.

• How to Set the ttymon Console Terminal Type — How to change the ttymon console terminal type.
• How to Set the Baud Rate Speed on the ttymon Console Terminal — How to change the ttymon console terminal baud rate speed.

• How to Set SMTP to Use TLS — How to use Transport Layer Security with the sendmail service to provide private, authenticated communications. Available in Solaris Express 8/05 and Solaris 10 1/06.

• How to Create an SMF Profile in the System Administration Guide: — How to create an SMF Profile to enable or disable selected services. Available in Solaris Express 7/06. Soon to be released in Solaris 10 11/06.

The following procedures are available in the Solaris 10 release.

• Associating Network Interfaces With Zones (Tasks) — Four different scenarios for assigning network interfaces and IP addresses to labeled zones.
• Administering Trusted Extensions Remotely — A selection of procedures showing how to configure a system remotely in Trusted Extensions.
• Headless System Configuration in Trusted Extensions — A set of procedures showing how to configure a system without a monitor with Trusted Extensions.

The following procedures are available in the Solaris 10 release and are covered in the Solaris ZFS Adminstration Guide.

• Creating the ZFS Storage Pool — How to create a ZFS Storage Pool.
• Creating ZFS File Systems — How to create a ZFS File System.

The following procedures are available in the Solaris 10 release and are covered in Solaris Containers--Resource Management and Solaris Zones.

• How to Move a Zone — How to move a non-global zone to a new location on the same system. Available in Solaris Express 3/06. Soon to be released in Solaris 10 11/06.
• How to Migrate a Non-Global Zone — How to migrate a non-global zone from one machine to different machine. Available in Solaris Express 4/06. Soon to be released in Solaris 10 11/06.