Sun Netra CP2160 Blade

Technical Specifications

 
  »   Features and Benefits
   Specifications
  »   Detailed View
 
Processor
Processor
One 650-MHz UltraSPARC IIi processor
Cache
Level 1: 32 KB
Level 2: 512 KB

Back to Top

 
Memory
Expandable memory
1 GB of on-board memory (expandable to 2 GB)
Flash memory
1 MB on-board flash memory, 7 MB of user-programmable memory

Back to Top

 
Bus Interface
Compact PCI Bus
PICMG (PCI Industrial Computer Manufacturers Group) 2.0 compliant, 33 MHz at 32/64 bits
Connector
2 mm pin and socket
Memory read/write bandwidth
500 MB/sec. (estimated)
System management
Sun Microcontroller IPMI (Intelligent Platform Management Interface)

Back to Top

 
Hot-Swap Support
Basic, full, and HA hot-swap support through PICMG 2.1, Rev 2 HA Hot-Swap compliance

Back to Top

 
Standard Interfaces
Network
Two 10/100 Mbps autosensing Ethernet ports; two MII (back panel)
PMC
Two PMC slots, 5-volt PMC
Serial
Two RS-232C asynchronous (rear panel) ports, one DIN8 (front panel) port
USB
Two USB ports (rear panel)

Back to Top

 
Connectors
Rear connectors: two USB, alarms out, external reset, two Ethernet, PMC
Rear (J3)
First PMC, hot-swap signals
Rear (J4)
No connectors
Rear (J5)
Two Ethernet (10/100) TP, two USB ports, I2C bus, second PMC
Front
Two Ethernet (10/100) RJ-45, one serial (mini-DB-9)

Back to Top

 
Software
Operating System
  • Solaris 8 Operating Environment (02/02)
  • Solaris 9 Operating Environment
Additional software support
  • Sun Validation Test Suite
  • Sun Management Center software

Back to Top

 
Supervisory

PICMG 2.9 System Management compliant

3-level watchdog timer; local alarm capabilities for power, voltage, thermal; field-replaceable unit (FRU) ID

Back to Top

 
Switches
Momentary reset button/switch and abort button/switch (both recessed from front panel)

Back to Top

 
TOD/NVRAM
Clock/calendar
8 KB of NVRAM (nonvolatile single inline memory module) no battery

Back to Top

 
Front Panel LEDS
  • Power OK
  • PICMG hot-swap
  • One alarm/user LED

Back to Top

 
Environment
Power
25 W typical at 650 MHz (est. includes 1 GB memory)
Power input
3.3, 5, +12, -12V required
Operating temperature
5 degrees C to 40 degrees C (41 degrees F to 104 degrees F), 5% to 95% relative humidity
Nonoperating temperature
-40 degrees C to 70 degrees C (-38 degrees F to 158 degrees F), 5% to 95% relative humidity
Cooling
300 LFM
Relative humidity
0% to 95% operational, noncondensing
Altitude
60 m (.04 mi.) below sea level to 4000 m (2.5 mi.) above sea level
Seismic
Meets GR-63-CORE and GR-1089-CORE requirements for earthquake risk Zone 4

Back to Top

 
Regulations
Meets or exceeds the following requirements:
EMC
  • U.S.: FCC Part 15 Class A
  • Canada: ICES 003 Class A
  • Japan: VCCI Class A
  • Europe: EN 55022 & 55024
  • Taiwan: BSMI Approval
Regulatory markings
  • UL 1950
  • CSA C2.22
  • EN60950
  • TUV
Telecom Environment Certification
Telcordia: NEBS Level 3

Back to Top

 
PICM Conformance
  • PICMG 2.0, Rev 3 CompactPCI (Power and Form Factor only)
  • PICMG 2.1, Rev 2 HA hot-swap
  • PICMG 2.9, Rev 1 IPMI System Management
  • PICMG 2.10, Rev 1 Keying of cPCI Board and Backplane
  • PICMG 2.14, Rev 1 IP Backplane
  • PICMG 2.15, Rev 1 PCI Telecom Mezzanine/Carrier Card

Back to Top

 
MTBF
160,000 hours

Back to Top

 
Transition Card
Rear transition module (RTM) XCP2060-TRN

Back to Top

 
Memory Cards
PC133: XCP2000-MEM-1GBSW, XCP2000-MEM-2 GB

Back to Top

 
Dimensions and Weight
Single-slot, Eurocard 6U form factor
Height
233.3 mm (9.2 in.)
Width
20.0 mm (0.8 in.)
Depth
159.85 mm (6.2 in.)

Back to Top