|
|
Processor
|
One 650-MHz UltraSPARC IIi processor
|
|
Cache
|
Integrated 4-way 512 KB Level 2 cache
|
|
 Back to Top
|
Expandable memory
|
Two Sun SODIMM memory modules (up to 2.5 GB maximum)
|
|
Flash memory
|
1 MB on-board flash memory, 8 MB user-programmable memory
|
|
Back to Top
|
10/100Base-T LAN bus
|
Interface PICMG (PCI Industrial Computer Manufacturers Group) 2.16 compliant
|
|
Connector
|
2 mm pin and socket
|
|
Memory read/write bandwidth
|
500 MB/sec. (estimated)
|
|
System management
|
Sun Microcontroller IPMI (Intelligent Platform Management Interface)
|
|
Back to Top
|
PICMG 2.1, Rev 2; PICMG 2.16 hot-swap specification
|
|
Back to Top
|
Network
|
Two 10/100 Mbps autosensing Ethernet ports (PICMG 2.16 routing)
|
|
PMC
|
Two PMC slots, 5-volt PMC
|
|
Serial
|
Two RS-232C asynchronous (one front, one rear panel)
|
|
USB
|
One USB ports (rear panel)
|
|
PIM
|
Two PIM slots to support PMCs for rear access
|
|
Back to Top
|
Rear connectors: two USB, alarms out, external reset, two Ethernet, PMC
|
|
Rear (J3)
|
PICMG 2.16
|
|
Rear (J4)
|
No connectors
|
|
Rear (J5)
|
Two Ethernet (10/100) TP, one USB port, I2C bus, 2nd PMC
|
|
Front
|
One serial (mini-DB-9)
|
|
Back to Top
|
Operating System
|
- Solaris 8 Operating Environment (02/02)
- Solaris 9 Operating Environment
|
|
Additional software support
|
- Sun Validation Test Suite
- Sun Management Center software
|
|
Back to Top
PICMG 2.9 System Management compliant
3-level watchdog timer; local alarm capabilities for power, voltage, thermal; field-replaceable unit (FRU) ID
|
|
Back to Top
|
Momentary reset button/switch and abort button/switch (both recessed from front panel)
|
|
Back to Top
|
Clock/calendar
|
8 KB of NVRAM (nonvolatile single inline memory module) no battery
|
|
Back to Top
- One READY LED
- One hot-swap LED
- One alarm/user LED
|
|
Back to Top
|
Power
|
25 W typical at 650 MHz (est. includes 512 MB memory)
|
|
Power input
|
3.3, 5, +12, -12V required
|
|
Operating temperature
|
5 degrees C to 40 degrees C (41 degrees F to 104 degrees F), 5% to 95% relative humidity
|
|
Nonoperating temperature
|
-40 degrees C to 70 degrees C (-38 degrees F to 158 degrees F), 5% to 95% relative humidity
|
|
Cooling
|
300 LFM
|
|
Relative humidity
|
0% to 95% operational, noncondensing
|
|
Altitude
|
60 m (.04 mi.) below sea level to 4000 m (2.5 mi.) above sea level
|
|
NEBS
|
Meets GR-63-CORE and GR-1089-CORE requirements
|
|
Back to Top
|
Meets or exceeds the following requirements:
|
|
EMC
|
- U.S.: FCC Part 15 Class A
- Canada: ICES 003 Class A
- Japan: VCCI Class A
- Europe: EN 55022 & 55024
- Taiwan: BSMI Approval
|
|
Regulatory markings
|
- UL 1950
- CSA C2.22
- EN60950
- TUV
|
|
Back to Top
|
6U Eurocard form factor
|
|
Depth
|
160 mm (6.2 in.)
|
|
Width
|
20.0 mm (0.8 in.)
|
|
Height
|
233.3 mm (9.2 in.)
|
|
Back to Top
- PICMG 2.0, Rev 3 CompactPCI (Power and Form Factor only)
- PICMG 2.1, Rev 2 hot-swap
- PICMG 2.9, Rev 1 IPMI System Management
- PICMG 2.10, Rev 1 Keying of cPCI Board and Backplane
- PICMG 2.15, Rev 1 PCI Telecom Mezzanine/Carrier Card
- PICMG 2.16, Rev. 1 Compact PCI Packet Switched Backplane
|
|
Back to Top
|
Hardware Support
|
1 year
|
|
Software Install
|
90 days
|
|
Call Response
|
8 hours/15 day parts replacement
|
|
Deliver
|
Return to Sun
|
|
Back to Top
|
|
