|
|
Placement
|
Single processor, ATX form factor
|
|
Processor
|
One 1.06-GHz UltraSPARC IIIi processor
|
|
L2 cache
|
1 MB integrated
|
|
Memory capacity
|
Up to 8 GB ECC DDR-1 DIMMs in four slots supported
|
|
PCI bus
|
Two buses: five slots (one 64-bit, 66-MHz slot; two 64/32-bit, 33-MHz slots; one 32-bit, 33-MHz slot)
|
|
Supported graphics
|
Up to three Sun XVR-100 graphics accelerators; Up to two Sun XVR-500 graphics accelerators
|
|
ATA 100 IDE
|
Two ATA100 IDE ports to support disk drives
|
|
Solaris Operating System
|
Solaris 8 Operating System HW 5/03
|
|
Size
|
Standard ATX form factor (12 in. x 9.6 in.)
|
|
 Back to Top
|
Ethernet
|
10/100/1000 BaseT
|
|
USB 1.1
|
Two ports
|
|
USB 2.0
|
Three ports (via optional PCI card)
|
|
Parallel
|
One port
|
|
Serial
|
Two ports
|
|
Back to Top
|
SX1500 meets or exceeds the below enviromental in a Sun Blade 1500 workstation enclosure:
|
|
AC power
|
100 to 120; 220 to 240 V AC, 47 to 63 Hz, 03. K VA
|
|
Operating temperature
|
5 degrees C to 40 degrees C (41 degrees F to 104 degrees F)
|
|
Nonoperating temperature
|
-32 degrees C to 65 degrees C (-25.6 degrees F to 149 degrees F)
|
|
Operating acoustic noise
|
5.0 bels
|
|
Idling acoustic noise
|
4.5 bels
|
|
Back to Top
|
Meets or exceeds the following requirements:
|
|
SX1500 meets or exceeds the below regulations in a Sun Blade 1500 workstation enclosure:
|
|
Safety
|
UL/CSA-60950, EN 60950, IEC60950 CB scheme with all national differences, IEC825-1,2 and CFR21 part 1040
|
|
Regulatory markings
|
CE, FCC, ICES-003, C-Tick, VCCI, GOST-R, BSMI, MIC, UL/cUL, TUV-GS, CCC, S-Mark
|
|
Ergonomics
|
EK ITB-2000
|
|
RFI/EMU
|
FCC Class B, ICES-003 Class B, VCCI Class B, EN55022 Class B, BSMI Class B, EN61000-3-2, EN61000-3-3
|
|
Immunity
|
EN55024
|
|
X-Ray
|
DHHS 21 Subchapter J; PTB German X-ray Degree
|
|
Back to Top
|
|
