Availability

The Netra CT 810 server offers outstanding levels of availability that contribute to continuous system operation and lower total cost of ownership. Features include PICMG-standard, HA-level, hot-swappable I/O slots, individually powered CompactPCI (cPCI) slots, NEBS Level 3 certification, and enhanced power and cooling.

The hot-swappable I/O slots support the highest level of hot-swap functionality of the PICMG (PCI Industrial Computer Manufacturers Group) 2.1 Rev 2 standard, enabling the addition and replacement of I/O components without completely shutting down the system. Individually powered cPCI slots provide the ability to shut down individual I/O slots in the event of component failure and allow administrators to plan the activation of specific features or functionality while deploying the entire system. Featuring NEBS Level 3-certification, Netra CT 810 server enables continuous operation in earthquake Zone 4 environments and complies with regulatory regulations for deployment in telco central office environments. NEBS Level 3 certification also means that Netra CT 810 servers have passed tests showing that they can tolerate extremes of temperature and humidity, operate in environments where there is dust, pollutants, or other air contaminants, retard fire, and resist other electrical hazards.

Enhanced power and cooling provide support for present and future processor boards that may have higher power consumption and I/O rates.

 

Serviceability

The Netra CT 810 server is designed to be flexible, modular, and easily serviceable. Remote, electronic field replaceable unit (FRU) identification allows for remote inventory of major subsystems with active components. A front or rear cabling configuration reduces service time. A front LED panel communicates the status of all active FRU components. In addition, remote system control and Lights Out Management (LOM) enable remote monitoring and management from a single console.  

Manageability

System management in the Netra CT 810 server has been desinged using industry-standard models and interfaces. In areas where deficiencies exist in the standards, Sun has incorporated additional features to enhance the standard while still adhering to the industry standard.

The Netra CT 810 server features conformance to PICMG specifications 2.9 (IPMI system management) and 2.14 (IP messaging). An Intelligent Platform Management Interface (IPMI), which provides a solid foundation for manageability and helps to lower total cost of ownership, allows for an industry-standard interface and methodology for system management. Utilizing IP as the message path for element management provides the speed and bandwidth necessary for efficient system management.

The Netra CT 810 server also incorporates Processor Management Services (PMS) and element management with hierarchical object modeling. PMS manages the software services that are present in an independent processor but not necessarily in an I/O card and gives administrators the ability to manage a satellite processor as a full independent processor and to "see" services on that processor independently.

Element management with hierarchical object modeling provides a detailed view of individually managed objects that can be integrated into a customized management framework, easing manageability and lowering total cost of ownership.

 

High Performance

The Netra CT 810 server is a high performance system that features a 650-MHz UltraSPARC processor and up to 2 GB of maximum server. UltraSPARC technology enhances the processing power and compute density of the network, allowing you to offer higher levels of service and performance. The large memory capacity enables larger applications to be run from memory instead of from disk, leading to increased performance.  

Standards

Providing the flexibility to deploy and integrate different solution architectures, the Netra CT 810 server adheres to industry specifications such as:

• PICMG (PCI Industrial Computer Manufacturers Group)
• TMN (Telecom Management Network)
• CIM (Common Information Model)
• ETSI (European Telecommunications Standards Institute)

To maximize data center and rack space, the industry-standard, rack-sized Netra CT chassis fits up to two Netra CT 810 servers or one Netra CT 810 server and two Netra CT 410 servers.

 

Processor

The processor on the Netra CT 810 server is a 650-MHz UltraSPARC IIi processor featuring a superscalar SPARC V9 architecture with 512 KB of Level 2 cache. UltraSPARC IIi technology delivers impressive computing throughput in a highly-integrated package, with efficient power consumption to enable cost-effective system designs.  

Capacity

• Single UltraSPARC IIi processor
• Up to 2 GB of memory
• Two 73 GB disk drive
• 6 User I/O slots

 

Main Memory

The Netra CT 810 server supports up to 2 GB of main memory with two Sun mezzanine memory modules (1 GB minimum).  

Standard Interfaces

Network:

Two 10/100-Mbps Ethernet ports

SCSI:

40 MB/sec. Ultra SCSI controller

Serial:

Two RS-232C serial ports

Expansion bus:

Six standard cPCI (CompactPCI) 6U hot-swappable slots with H.110 support

All cPCI I/O slots conform to PICMG specifications:

• PICMG 2.0, Rev 3
• PICMG 2.1, Rev 2
• PICMG 2.5, Rev 1
• PICMG 2.9, Rev 1
• PICMG 2.14, Rev 1

Alarms:

6U single slot

 

Mass Storage

Internal storage:

Two 3.5-in. x 1-in. 73-GB Ultra SCSI front-accessible disks

DVD-ROM:

DVD-ROM drive

External storage:

Sun StorEdge S1 array

External media tray:

All standard SCSI-2 devices

 

Software

Solaris 9 and Solaris 8 Operating Systems  

Environment

Power supply:

• -48 to -60 V DC nominal; 420 W per power supply
• 110 to 220 V AC nominal; 420 W per power supply

Power input:

• Four DC input filters (front or rear)
• Four AC input filters (rear only)

Operating:

5° C to 40° C (41° F to 104° F), 5% to 85% relative humidity noncondensing, subject to a maximum humidity of 0.024 kg water/kg dry air

Short-Term Operating:

-5° C to 55° C (23° F to 131° F), 5% to 90% relative humidity noncondensing

Nonoperating:

-40° C to 70° C (-38° F to 158° F), 10% to 95% relative humidity noncondensing

Altitude:

-300 m to 1800 m

ETSI:

ETS 300-19-2-3, Table 3.1, Climatic

Acoustic noise:

Less than 60 dBA (GR-63-Core Test Method)

Seismic:

Meets GR-63-CORE requirements for earthquake risk Zone 4 and meets ETS 300-19-2-3 A1 operating requirements

 

Regulations

Meets or exceeds the following requirements:

Safety:

UL 1950/CAS C22.2 No. 950, EN 60950 (73/23/EEC), IEC 950, CCIB for PSU, GOSTMark

Emissions:

CFR Title 47 FCC Part 15, EN 55022 (89/336/EEC)

Immunity:

EN 50082-1 (89/336/EEC)

Certification:

Safety cULus Mark, TUV GS Mark, CE Mark EMC CE Mark, (93/68/EEC), FCC authorized Class A, VCCI, BSMI, CTICK

Telecom Environment Certification:

Telcordia: SR 3580 NEBS Level 3

 

Dimensions and Weight

Server:

• Height: 513 mm (20.18 in.)
• Depth: 379 mm (14.91 in.)
• Width: 218 mm (8.5 in.)
• Weight: 17 kg (38 lb.), fully loaded

Chassis:

• Height: 534 mm (21.0 in.)
• Depth: 400 mm (15.7 in.)
• Width: 445 mm (17.5 in.)
• Weight: 34 kg (74 lb.), empty; 68 kg (150 lb.), fully loaded

Enclosure:

Fits 19-, 23-, 24-in., and 600 mm racks

Product Family Positioning

---

Links Mentioned on This Page

This page is located at: http://www.sun.com/products-n-solutions/hw/networking/ct810/details.xml

Additional links mentioned are:

???There_are_no_additional_links_on_this_page???

 
Copyright 2004-2009 Sun Microsystems, Inc.