Sun Blade 8000 Modular System

The Sun Blade 8000 Modular System is the only system designed specifically for high-end x86 computing that delivers the best-of-both worlds: the performance, price and flexibility of the top-of-the-line rackmount servers and the serviceability and efficiency of blade servers. Compared to leading blade servers in the market, the Sun Blade 8000 Modular System provides up to double the system longevity, double the I/O throughput in 25% less space. Compared to leading rackmount servers the Sun Blade 8000 Modular System provides up to double the I/O throughput, and up to 40% lower power requirements in 50% less space. The balanced design of the Sun Blade 8000 Modular System makes it the ideal platform for running your most demanding CPU and I/O intensive enterprise-class applications.

The intent of the power calculator is to provide guidance for estimating the electrical and heat loads for typical operating conditions. It should not be used to calculate power or HVAC requirements. Instead, please use the appropriate site planning guide to allow for proper allowances.

You MUST allow electrical and cooling headroom for unforeseen circumstances, component upgrades, and increased computational loads. Please allow for worst-case power conditions. Actual power consumption will vary from the sample workload used in the power calculator. These include, but are not limited to, the factors below. Each of these factors may cause significant differences in power consumption:

  • Actual workload and its fluctuations
  • Ambient temperature
  • Cooling patterns
  • Excessive inlet temperature
  • Humidity
  • Operating systems features
  • Power management settings

The "Sample Power" results shown below (if using 100% workload) represent Server power consumption measurements with CPUs at 100% utilization running SPECjbb2005. HPC workloads may consume more power than the commercial workload used in this calculator. If shown for this calculator, the "Active Idle Power" results below represent power consumption measurements taken from Servers with Operating Systems booted and stabilized, yet running at minimal utilization. Sample results shown are representative of measurements taken with room temperatures below 25°C. System power can vary depending upon Hardware/Software configurations and environmental conditions. For precise results, actual measurements based upon the exact Hardware/Software/Environmental conditions are recommended.

Note: JavaScript must be enabled to view this section of the website.

Step 1: Choose and configure up to 10 Server Modules.

Item Server
Module
Config
A
Server
Module
Config
B
Server
Module
Config
C
Server
Module
Config
D
Server
Module
Config
E
Server
Module
Config
F
Server
Module
Config
G
Server
Module
Config
H
Select Processor Technology
Learn more
Select Server Module Model
Learn more
Select Processor Model
Select CPU Quantity
Select DIMM Quantity (4GB)
Select DIMM Quantity (2GB)
Select DIMM Quantity (1GB)
Select HDD Quantity
PCIe ExpressModule - Dual Port Fibre Channel
PCIe ExpressModule - Dual Port InfiniBand
PCIe ExpressModule - Dual Port Gigabit Ethernet
PCIe ExpressModule - Dual Port 10 Gigabit Ethernet
Indicate Workload (%):

Choose up to 10 server modules with this configuration.

Number of Modules Desired:
Learn more
SAMPLE WORKLOAD POWER CONSUMPTION (BLADE-ONLY)
SAMPLE ACTIVE IDLE POWER CONSUMPTION (BLADE-ONLY)

Step 2: Choose Chassis Components

Item
Sample Workload/
Active Idle
Notes
Sun Blade 8000 (base) Chassis
850W/750W
9 Rear Fan Modules, 3 Front Fan Modules, 6 Power Supply Modules,
1 Chassis Monitoring Module
Optional (2nd) Chassis Monitoring Module
1 Chassis Monitoring Module is included in the base Chassis.
The second Chassis Monitoring Module is optional.
Network Express Modules - Minimum 0, Maximum 4 per Sun Blade 8000 Chassis
Network Express Module - 20 Port, Gigabit Ethernet passthru
 
Network Express Module - 20 Port, 4Gb/s Fibre Channel passthru
 
Network Express Module - 10 Port, 4x DDR InfiniBand passthru
 
   
 
Sample Results
Item
Sample Power
Active Idle Power

SYSTEM WATTS   (Blades, Chassis, etc.)

(estimated)

(estimated)

SYSTEM BTU/HR    (Blades, Chassis, etc.)

(estimated)

(estimated)
 
Legal Notice: This calculator is subject to change without notice and is provided "as is" without warranty of any kind, express or implied. Sun Microsystems does not make any representations regarding the use, validity, accuracy or reliability of the tool. The entire risk arising out of the use of this tool remains solely with the customer. In no event shall Sun Microsystems be liable for any direct, consequential, incidental, special, punitive or other damages, even if Sun is negligent or has been advised of the possibility of such damages, arising from use of the tool or the information provided herein.