Tech Specs
Specifications
If you've been planning a virtualization or consolidation project to make your datacenter more efficient, Sun can help get you there. The Sun Blade T6340 server module has more than enough compute power, memory, and I/O capacity to handle the demands of virtualization. And stacked in a Sun Blade 6048 or 6000 Chassis, the Sun Blade T6340 delivers that processing punch in an ultra-dense footprint.
Key Specifications
Two-socket, 6 or 8-core UltraSPARC T2 Plus processor
Up to 128 simultaneous execution threads
One floating-point processor per core and integrated, on-chip crypto accelerator
32 DIMM slots with maximum memory capacity of 256 GB
Integrated Lights Out Management (ILOM) with remote KVMS
Processor
Processor
Two six- or eight-core 1.2 GHz, or eight-core 1.4 GHz UltraSPARC T2 Plus processor
Up to 128 simultaneous execution threads
One floating-point processor per core, up to eight per processor
On-board cryptography supporting 10 embedded security industry-standard ciphers: DES, 2DES, AES, RC4, SHA1, SHA256, RSA to 2048 key, ECC , CRC32
SPARC V9 architecture, ECC protected
Cache per processor
16 KB instruction
8 KB primary data cache
4 MB integrated L2
Memory
Main memory
Supports 1 GB, 2 GB, 4 GB, and 8 GB 1.5 V fully buffered ECC Registered DIMMs
32 DIMM slots, supporting a maximum of 256 GB
Interfaces
Network
Two 10/100/1000Base-T Ethernet ports using the Intel 82571EB GbE transceiver
One dedicated 10/100Base-T Ethernet port for the management network
Two optional 10 GB XAUI Ethernet ports through the addition of a dual channel 10 GbE fabric expansion modules
Storage
Six 3.0 Gb/sec SAS/SATA interfaces using the LSI SAS1068E Controller
One SAS interface to each of the small form factor (SFF) SAS/SATA drive bays with RAID 0, 1 support
Four SAS interfaces to the midplane
Support 32 GB SSD, 146GB 10,000 rpm SAS, 300GB 10,000 rpm SAS
Midplane I/O
Four x8 PCIe busses
Two dedicated to NEMs
Two dedicated to EMs
Four 3.0 Gb/sec SAS interfaces, two per NEM
Two 10/100/1000 GbE interfaces, one per NEM
10/100 Ethernet management port to Chassis Monitoring Module (CMM)
Front panel I/O
Exposed via dongle cable:
One RJ-45 serial console to server module ILOM
Two USB ports for keyboard, mouse, or storage
One HD-15 video out
Supporting SAS/SATA SFF disks and solid-state drives (SSD)
Software
Operating systems
Solaris 10 10/08 and Solaris 10 5/09
Other software
Solaris 10 5/09 OS Preloaded
LDoms Manager and MIB 1.2 Pre-install
ILOM 3.0
CMT Tools 1.0 Pre-install
GCC 4 for SPARC Systems 4.0.4 Pre-install
Sun Studio 12 Pre-install
SYS, FW, Download UTIL Pre-install
MAI, 10 GBE ETCSYS CFG
Live Upgrade, ABE Pre-install
Networking
ONC, ONC+, NFS, WebNFS, TCP/IP, SunLink, OSI, MHS, IPX/SPX, SMB technologies, and XML
Management
Built-in ILOM service processor delivers:
Direct manageability – same as Sun rackmounted servers
Full monitoring of blade by SNMP
Graphical user interface (GUI) and comprehensive command line interface (CLI) emulating Advanced Lights Out Manager (ALOM)
Secure access and control
Full-featured virtual console through remote keyboard, video, mouse, storage (KVMS) feature
Optional Sun xVM Ops Center – advanced hardware management enabling: discovery, grouping, bare metal provisioning, hardware and OS monitoring, and integrated LDoms management
Dimensions and weight
Height
44.45 mm (1.75 in.)
Width
327.15 mm (12.88 in.)
Depth
496.82 mm (19.56 in.)
Weight (fully configured)
9.1 kg (20 lb)
Companion Products
Blades & I/O
Other Blades Resources
Software Downloads
Software
Solutions
Solution Briefs
Support Services
