System Management Services (SMS) 1.6 for Solaris 9 and 10 Operating Systems
Sun Fire E25K/E20K/15K/12K System Management Services (SMS) 1.6 is the newest version of system management software for use on Sun Fire
E25K/E20K/15K/12K System Controllers (SCs) to manage Sun Fire high-end systems. SMS 1.6 enables support for new hardware and software features on Sun Fire E25K/E20K/15K/12K servers.
Sun Fire E25K/E20K/15K/12K SMS 1.6 mandates the following conditions:
System Controllers
System Controllers must have as the minimum Operating System: Solaris 9 4/04 or Solaris 10 1/06 with required patches.
Domains Domains running on UltraSPARC IV must have as the minimum Operating System: Solaris 8 2/02, Solaris 9 4/04, Solaris 10 3/05 HW1, or Solaris 10 1/06 or higher, with required patches. Domains running on UltraSPARC IV+ must have as the minimum Operating System: Solaris 9 9/05 , Solaris 10 3/05 HW1, or Solaris 10 1/06 or higher, with required patches.
For more information on what patches are needed, please see the SMS 1.6 Installation Guide.
NOTE: All existing SMS 1.5, 1.4.1, 1.4, 1.3, 1.2, and 1.1 users are encouraged to migrate to SMS 1.6 at this time. Sustaining support for SMS 1.4.1 will be discontinued effective July 15, 2006. Sustaining support for SMS 1.3 was discontinued October 5, 2005, and sustaining support for SMS 1.4, 1.2, and 1.1 was discontinued effective June 9, 2004. As of July 15, 2006, SMS 1.6 and 1.5 are the supported SMS releases.
New features of SMS 1.6:
UltraSPARC IV+ 1.8 GHz processor support
PCI-X support
Solaris 10 support on the System Controller (SC)
SMS 1.6 software is available as a ZIP file capable of being unpacked with the unzip(1) command present in the Solaris Operating System.
Patches:
SMS patches are available and required for proper operation of your Sun Fire E25K/E20K/15K/12K server. External SunSolve Patches available for SMS 1.6: click here.
If you need to reinstall the software, be certain to re-apply any patches you may have previously applied.
Follow these guidelines when applying patches:
Disable failover before installing the patches.
The system should be stable.
No DR operations should be in progress.
No domain bring up or shutdown should be in progress.
No user initiated data sync or cmdsync operations should be in progress.
Complete any domain, board, or configuration changes before you begin patch installation.
Please read all patch instructions carefully before attempting this procedure. Instructions in the patch procedure could preempt these
instructions.
Software Download:
To download SMS 1.6 software, click here.
Once you have downloaded the file, type the following UNIX command at a command prompt in the directory in which the ZIP file resides:
SMS 1.6 for Solaris 9 OS:
cksum SMS-1_6-S9-sparc.zip
The command should report the following information:
819348543 14727272 SMS-1_6-S9-sparc.zip
SMS 1.6 for Solaris 10 OS:
cksum SMS-1_6-S10-sparc.zip
The command should report the following information:
2388254783 14689759 SMS-1_6-S10-sparc.zip
This output confirms the successful download of SMS 1.6. Any other results indicate a faulty download that must be retried. Do not attempt to use corrupt ZIP archives. Do not attempt to use corrupt ZIP archives.
System Management Services (SMS) 1.5
for Solaris 8, 9 and 10 Operating Systems
Sun Fire E25K/E20K/15K/12K System Management Services
(SMS) 1.5 is the newest version of system management software for use
on Sun Fire E25K/E20K/15K/12K System Controllers (SCs) to manage Sun
Fire high-end systems. SMS 1.5 enables new availability and security
features on Sun Fire E25K/E20K/15K/12K servers.
Sun Fire E25K/E20K/15K/12K SMS 1.5 mandates the
following conditions:
System Controllers
System Controllers must have as the minimum Operating System: Solaris 8
2/02 or Solaris 9 4/04 with required patches.
Domains
Domains running on UltraSPARC IV must have as the minimum Operating
System: Solaris 8 2/04, Solaris 9 4/04, or Solaris 10, with required
patches.
For more information on what patches are needed, please
see the SMS 1.5
Installation Guide.
NOTE: All existing SMS 1.4.1,
1.4,
1.3, 1.2, and 1.1 users are encouraged to migrate to SMS 1.5 at this
time. Sustaining support for SMS 1.3 will be discontinued effective
October 5, 2005. Sustaining support for SMS 1.4, 1.2, and 1.1 was
discontinued effective June 9, 2004. As of October 5, 2005, SMS 1.5 and
1.4.1 are the supported SMS releases.
New features of SMS 1.5:
New Availability Feature Set
Voltage Core Monitoring
NSA Domain Security
Memory Refresh Rate
SC Secure By Default
SMS 1.5 software is available as a ZIP file capable of
being unpacked
with the unzip(1) command present in the Solaris Operating System.
Patches:
SMS patches are available and required for proper
operation of your Sun
Fire E25K/E20K/15K/12K server. External SunSolve Patches available for
SMS 1.5: click here
If you need to reinstall the software, be certain to
re-apply any
patches you may have previously applied.
Follow these guidelines when applying patches:
Disable failover before installing the patches.
The system should be stable.
No DR operations should be in progress.
No domain bring up or shutdown should be in progress.
No user initiated data sync or cmdsync operations
should be in progress.
Complete any domain, board, or configuration changes
before you begin patch installation.
Please read all patch instructions carefully before
attempting this
procedure. Instructions in the patch procedure could preempt these
instructions.
Software Download:
To download SMS 1.5 software, " click
here".
Once you have downloaded the file, type the following
UNIX command at a
command prompt in the directory in which the ZIP file resides:
SMS 1.5 for Solaris 8 OS:
cksum sms_1_5_sparc.zip
The command should report the following information:
2309987684 14548034 sms_1_5_sparc.zip
SMS 1.5 for Solaris 9 OS:
cksum sms_1_5_sparc.zip
The command should report the following information:
3559967584 14546672 sms_1_5_sparc.zip
This output confirms the successful download of SMS 1.5.
Any other
results indicate a faulty download that must be retried. Do not attempt
to use corrupt ZIP archives. Do not attempt to use corrupt ZIP archives.
System Management Services (SMS) 1.4.1
for Solaris 8, 9 and 10 Operating Systems
Sun Fire E25K/E20K/15K/12K System Management Services
(SMS) 1.4.1 is a release of system management software for use on Sun
Fire E25K/E20K/15K/12K System Controllers (SCs) to manage Sun Fire
high-end systems. SMS 1.4.1 was the first system management software
release to support Sun UltraSPARC IV processors on Sun Fire
E25K/E20K/15K/12K servers.
Sun Fire E25K/E20K/15K/12K SMS 1.4.1 mandates the
following conditions:
System Controllers
System Controllers must have as the minimum Operating System: Solaris 8
2/02 or Solaris 9 4/04 with required patches.
Domains
Domains running on UltraSPARC IV must have as the minimum Operating
System: Solaris 8 2/04, Solaris 9 4/04, or Solaris 10, with required
patches.
For more information on what patches are needed, please
see the SMS
1.4.1 Installation Guide.
NOTE: All existing SMS 1.4.1,
1.4,
1.3, 1.2, and 1.1 users are encouraged to migrate to SMS 1.5 at this
time. Sustaining support for SMS 1.3 will be discontinued effective
October 5, 2005. Sustaining support for SMS 1.4, 1.2, and 1.1 was
discontinued effective June 9, 2004. As of October 5, 2005, SMS 1.5 and
1.4.1 are the supported SMS releases.
New features of SMS 1.4.1:
Support for UltraSPARC IV Uniboards on Sun Fire
E25K/E20K/15K/12K
SMS 1.4.1 software is available as a ZIP file capable of
being unpacked
with the unzip(1) command present in the Solaris Operating Environment.
Patches:
SMS patches are available and required for proper
operation of your Sun
Fire E25K/E20K/15K/12K server. External SunSolve Patches available for
SMS 1.4.1: click here
If you need to reinstall the software, be certain to
re-apply any
patches you may have previously applied.
Follow these guidelines when applying patches:
Disable failover before installing the patches.
The system should be stable.
No DR operations should be in progress.
No domain bring up or shutdown should be in progress.
No user initiated data sync or cmdsync operations
should be in progress.
Complete any domain, board, or configuration changes
before you begin patch installation.
Please read all patch instructions carefully before
attempting this
procedure. Instructions in the patch procedure could preempt these
instructions.
Software Download:
To download SMS 1.4.1 software, " click
here ".
Once you have downloaded the file, type the following
UNIX command at a
command prompt in the directory in which the ZIP file resides:
SMS 1.4.1 for Solaris 8 OE:
cksum sms_1_4_1_sparc.zip
The command should report the following information:
1676552961 13369046 sms_1_4_1_sparc.zip
SMS 1.4.1 for Solaris 9 OE:
cksum sms_1_4_1_sparc.zip
The command should report the following information:
3777164402 13367396 sms_1_4_1_sparc.zip
This output confirms the successful download of SMS
1.4.1. Any other
results indicate a faulty download that must be retried. Do not attempt
to use corrupt ZIP archives. Do not attempt to use corrupt ZIP archives.
