|
Processors and Memory
|
|---|
|
Storage node
|
One Storage node equals:
- Sun Fire X2100 derivative design
- One AMD Opteron Socket 939 (2.2 GHz Processor)
- 3 GB Unbuffered DDR1/400 ECC memory
- Two Integrated 10/100/1000Base-T Ethernet ports
- Four 500 GB SATA HDD
|
|
|
Overall storage capacity
|
Storage capacity per system (Min) : 16TB (raw)
Storage capacity per system (Max) : 256TB (raw)
Half-cell system: 8 storage nodes (16TB raw capacity)
Full-cell system: 16 storage nodes (32TB raw capacity)
Dual-cell system: 32 storage nodes (64TB raw capacity)
Each StorageTek 5800 half cell or full cell system also has:
- Two L2 Gigabit Ethernet load-balancing switches
- One service node
Each StorageTek 5800 dual cell system also has:
- Four L2 Gigabit Ethernet load-balancing switches
- Two service nodes
|
|
|
Service node
|
- Sun Fire X2100M2 server
- One 1.8Ghz AMD Opteron dual core processor with 1MB cache
- 2 GB DDR/400 ECC unbuffered memory
|
|
Standard / Integrated Interfaces
|
|---|
|
Network
|
Two 10/100/1000 Base-T Ethernet ports per cell (One port strictly for service)
|
|
Software
|
|---|
|
Operating system
|
StorageTek 5800 system software based on Solaris 10 and Java technology
|
|
|
File access protocols
|
Java and C APIs along with variety of other industry-standard interfaces such as WebDAV
|
|
|
Supported clients
|
Client OS supported with "C" or Java:
- Solaris 10 11/06 (SPARC & x86)
- Solaris 9 HW 9/05 (SPARC)
- Red Hat Enterprise Linux (32-bit) RHEL4-U4
- Red Hat Enterprise Linux (64-bit) RHEL4-U4
- Windows Server 2003 R2 32-bit
- Windows XP
|
|
|
Metadata query engine
|
Sun StorageTek 5800 system embedded query engine
|
|
|
Disaster recovery/Tape backup
|
NDMP v4 using BakBone NetVault software
|
|
|
System administration
|
CLI and GUI interface
|
|
|
Mail services
|
SMTP
|
|
|
Setup and configuration
|
Sun StorageTek 5800 integrated GUI/CLI
|
|
Physical Planning
|
|---|
|
Dimensions
|
H: 74 in. (187.9 cm)
W: 23.5 in. (59.69 cm)
D: 35.4 in. (89.91 cm)
|
|
|
Maximum weight
|
Full Cell:
990 lb (449.1 kg)
(Rack & PDS only = 420 lb; 17 nodes + 2 switches + cables = 570 lb)
Half Cell:
705 lb (319.78 kg)
(Rack & PDS only = 420 lb; 9 nodes + 2 switches + cables = 285 lb)
|
|
Environmental
|
|---|
|
Temperature
|
Operating:
5° to 35° C (41° to 95° F)
Non-operating (storage):
Full Cell:
-43° to 68° C (-45° to 154° F)
Half Cell:
-10°C and 55°C (-14° to 131° F)
|
|
|
Relative humidity
|
Operating:
7% RH and 93% RH
Non-operating (storage):
Full Cell: 93% RH noncondensing at 40° C for 5 days
Half Cell: 93% RH and 7% RH
|
|
|
Altitude
|
Operating:
3200 m at 40° C
Non-operating:
12200 m at 0° C for 4 hours
|
|
|
Shock
|
Operating:
10 shocks in all 6 axes; 3.5 g 11 ms
Non-operating:
Threshold and Roll off shock
|
|
|
Vibration
|
Operating:
Swept sine 5-500 Hz, 1 octave/minute, 10 sweeps X,Y=.112 g Z=.17 g
Non-operating:
Swept sine 5-500 Hz, 1 octave/minute, 10 sweeps, .18 g
|
|
|
Heat output (max)
|
14080 W(48070 BTU/hr)(Rack PDS = 3520W per input x 4 inputs)
|
|
Power Requirements
|
|---|
|
AC power (CU)
|
200 to 240 VAC at 50 to 60 Hz single phase
|
|
Standards Compliance
|
|---|
|
Safety and emissions
|
EN60950-1:2001 1st Ed.
IEC60950-1:2001 1st Ed. evaluated to all countries
UL and cUL/CSA60950-1:2001
CSAC22.2 No. 60950-00
EN55022
EN61000-3-2
EN61000-3-3
|
|
|
Immunity
|
EN55024
|
|
|
Enclosure
|
Up to two full-cell StorageTek 5800 systems can fit in a single
Sun Rack 1000-38 rack
|
|
|
AC power
|
Two 220-Volt L6-20 power cords are required per (half or full cell)
Four 220-Volt L6-20 power cords are required per dual cell
|
