|
System Architecture
|
|
I/O module
|
Single SAS I/O module
|
|
|
Interfaces/link speeds
|
Four 3 Gb/sec SAS ports per tray
|
|
|
Bandwidth
|
Up to 48 Gb/sec total bandwidth:
- 2 (x4-wide) SAS host/uplink ports (24 Gb/sec bandwidth)
- 2 (x4-wide) SAS host/expansion port (24 Gb/sec bandwidth)
|
|
|
RAID levels
|
HW (with RAID HBA): RAID levels 0, 1, 10, 1E, 5, 6, 50, 5EE, 60
SW (w/Solaris ZFS): RAID levels 0,1,5,6
|
|
|
Drive population
|
Fully populated with 48 SATA hard disk drives per tray
|
|
|
Dynamic capacity expansion
|
48 to 192 drives, 24 TB to 192 TB
|
|
|
Volume
|
HW (with RAID HBA): 512 TB per LUN
SW (w/Solaris ZFS): Virtually unlimited
|
|
Disk Drives
|
|
Form factor
|
3.5-inch
|
|
|
Interface
|
SATA II
|
|
|
Supported drive types
|
500 GB, 750 GB, 1TB; 7200 rpm
|
|
Supported Platforms
|
|
Servers
|
|
|
Software
|
|
Management software
|
|
|
|
Operating system (OS) support
|
Solaris (SPARC and X64), Red Hat Enterprise Linux, SuSE Linux Enterprise Server, Microsoft Windows Server
|
|
Reliability, Availability and Serviceability
|
|
RAS features
|
- High availability due to redundant, hot-swappable components
- Non-disruptive firmware upgrades
- Non-disruptive component (Major FRU) replacement
- Non-disruptive hot-swappable disk drives
- Dual hot-swappable, redundant, and load-sharing power supplies
- Hot-swappable and redundant cooling fans
- RAID protection provided by host S/W or H/W (Sun StorageTek SAS RAID HBA)
|
|
|
Remote services
|
|
|
Dimensions
|
|
Height x width x depth
|
6.89 in. x 17.28 in. x 29.52 in. (175.05 mm x 439.0 mm x 749.90 mm)
|
|
|
Weight (maximum)
|
170 lb. (77 kg)
|
|
Power
|
|
Input voltage
|
90 - 264 VAC
|
|
|
Input frequency
|
47 - 63 Hz
|
|
|
Output power
|
1500 W
|
|
|
Power consumption
|
|
|
Operating Environment
|
|
Heat output
|
1020 W (3515 BTU/hr)
|
|
|
Temperature
|
35°F to 95°F (0°C to 35°C)
|
|
|
Humidity (non-condensing)
|
20% to 80% maximum
|
|
|
Altitude
|
0 to 9843 feet (3000 meters)
|
|
|
Shock
|
3.0G, 11 ms half-sine
|
|
|
Vibration
|
Swept sine, vertical (Z) axis: 0.15G, 0-peak, 5 Hz to 500 Hz; swept sine, horizontal (X,Y) axes: 0.10G, 0-peak, 5 Hz to 500 Hz
|
|
Warranty
|
|
Duration
|
Three years — parts exchange
|
|
|
Phone support
|
8 a.m.–5 p.m., Mon.–Fri.
|
|
Regulations
|
|
Electromagnetic emissions standards
|
- ICES-003
- VCCI - for Japan
- GOST R2
- BSMI2
- C-TICK for Australia and New Zealand
- MIC
- Part 15 47 CFR
- EN 55022, EN300-396:v1.31
- CISPR 22
|
|
|
Safety standards
|
- IEC60950
- UL/CSA60950
- EN60950
- CB scheme with all country differences
- cULus Mark
- CE Mark
- GOST R
- S-Mark
|