Sun StorageTek 2540 Array

Get the Sun StorageTek 2540 Array
Get  the Sun StorageTek 2540 Array

Specifications

With ease of use, flexibility, density, scalability, and high availability, the affordable Sun StorageTek 2540 array is the ideal solution for your growing storage requirements.


Sun StorageTek 2540 Array
Controller card Dual and single Fibre Channel RAID controller

Cache size (with ECC protection) 512 MB/controller to 1 GB/system

Host interfaces/link speeds Two to four 4 Gb/sec FC ports per controller tray

Other interfaces (per dual controller tray) Up to two 10/100 Base-T Ethernet ports
Up to two nine-pin RS-232 serial ports per dual controller tray

RAID levels 0, 1, (1+0), 3, 5 and 6 (p+q)

Cache battery backup Up to 72 hours (depending on cache size)

Integrated data services
  • Sun StorageTek Data Snapshot (optional) - supports four snaps per volume, 128 per array
  • Sun StorageTek Enhanced Data Snapshot (optional) - supports eight snaps per volume, 128 per array
  • Sun StorageTek Volume Copy (optional)
  • Sun StorageTek Storage Domains - two domains included; (optional) - four, eight, sixteen or thirty two

Dynamic capacity expansion Five to 48 drives - 730 GB to 48.0 TB

Expansion tray Up to three expansion trays

Drive depopulation Scales from five to 12 hard disk drives per tray

Volume Up to 256 (32 per host)

Global hot spares Up to 30

Maximum array capacity 21.6 TB (450 GB SAS drives)
48.0 TB (1 TB SATA drives)
Disk drives - Supported drives/system per tray capacity: raw, unformatted
Form factor 3.5 in., low-profile

Interface Dual-ported SAS

SAS drives 146 GB 15,000-rpm 3 Gb/sec 1.75 TB per tray
300 GB 15,000-rpm 3 Gb/sec 3.6 TB per tray
450 GB 15,000-rpm 3 Gb/sec 5.4 TB per tray
400 GB 10,000-rpm 3 Gb/sec, 4.8 TB per tray

SATA–ll drives 500 GB, 7,200-rpm 3 Gb/sec, 6.0 TB per tray
750 GB, 7,200-rpm 3 Gb/sec, 9.0 TB per tray
1.0 TB 7,200-rpm 3 Gb/sec,12.0 TB per tray
Supported software
Supported software
Management software support
Management software support Sun StorageTek Common Array Manager Software — included
Operating system support
Operating system support
  • Solaris Operating System 9, 10 and x86
  • Microsoft Windows 2003, 2008
  • SUSE Linux 9.0, 10.0
  • Red Hat Enterprise Linux 4.0, 5.0
  • VMware ESX 3.0.2 and higher
Host connectivity
Host/HBA/FC switches All HBAs supported in SAN 4.4.12
Warranty
Duration Three years (parts only)

Phone support 8 a.m.-8 p.m., Mon-Fri

Replacement parts Return to Sun
Dimensions
Height x width x depth 86.1 mm (3.39 in.) x 448.6 mm (17.66 in.) x 540 mm (21.26 in.)

Weight (maximum) 59.55 lbs
Power requirements
AC power 515 W (+ 5 V @ 19 A/+12 V @ 35 A )

DC power 17 A Max Operating (-42 to -60 VDC)
Environmental (operating)
Operating temperature 10-40° C (50-104° F) without battery
10-35° C (50-95° F) with battery

Relative humidity 20-80 percent non-condensing

Operating altitude 68.3 kPa (3,200m), 40° C, four-hour dwell[1]

Operating shock 5.5 Gs, 11ms, half-sine, 10 shocks per direction, all six directions

Operating vibration All three axes: 0.25 Gs, 5 to 500 Hz, swept-sine, five sweep cycles, one octave per minute

Heat output 460 watts (1,571 BTU/hr.)
Environmental (non–operating)
Temperature (storage) -10 to 50° C (-14 to 122° F) without battery; -10° to 45° C (-14° 113° F) with battery (three-month maximum

Temperature (transit) -40 to 60° C (-40 to 140° F) without battery
-20 to 60° C (-4 to 140° F) with battery (one-week maximum)

Humidity (storage) 10-90%, max dew point is 26° C (79°F), 10% per hour gradient

Humidity (transit) 5-95%, max dew point is 26° C (79°F), 10% per hour gradient

Altitude 18.8 kPa (12,200m), oC, four-hour dwell[1]

Shock 20 G, 8.0 msec square wave in each direction along x, y, and z axes

Vibration All three axes: 1.2 Gs, 5 to 500 Hz, swept-sine, five sweep cycles, one octave per minute
Regulations
Safety and emissions FCC Class A VCCI Class A, EN55022 Class A, EN 55024 UL BSM, C-Tick RoHS
WEEE

NTS certified NEBS Level 3

[1]Commencing upon product reaching temperature stability