Overview Features Tech Specs Resources Support Get It Specifications Finally. A switching module with the performance to make multilayer SANs a reality. The Cisco MDS 9000 Family 4-Port 10 Gb/sec Fibre Channel Switching Module delivers 10 Gb/sec link bandwidth and 80 Gb/sec of continuous aggregate bandwidth per module. Its ultra-high performance makes the module ideal for ISL connectivity both within the datacenter and between datacenters across metro optical networks. Key Specifications 10 Gb/sec link bandwidth 80 Gb/sec continuous aggregate bandwidth per module 4-528 ports per chassis 132 ports in a single 42-unit rack Up to 44 10 Gb/sec ports per single chassis Details Systems Architecture Management Software Compatibility Diagnostics and Troubleshooting Tools RAS Features Environmental Regulations Warranty Systems Architecture Port speeds 10 Gb/sec fixed speed Buffer credits 250 per port (default), up to 4095 on an individual port (with optional Enterprise Package license activated) PortChannel Up to 16 ports Supported optics, media, and transmission distances Optics Media Distance 10 Gb/sec Optics Modules: 10 Gb/sec SW, SC X2 50/125-micron (enhanced) multimode 300 m 10 Gb/sec SW, SC X2 62.5/125-micron multimode 33 m 10 Gb/sec LW, SC X2 9/125-micron single-mode 10 km Ports Four 10 Gb/sec Fibre Channel ports per module Fabric services Name server Registered State Change Notification (RSCN) Login services Fabric Configuration Server (FCS) Public loop Broadcast In-order delivery FICON FC-SB-3 compliant Cascaded FICON fabrics Intermix of FICON and Fibre Channel FCP traffic CUP management interface Advanced functionality VSAN Inter-VSAN Routing PortChannel with Multipath Load Balancing QoS-flow-based, zone-based Fibre Channel Congestion Control N_Port ID Virtualization Network security VSANs Access control lists Per-VSAN role-based access control Fibre Channel zoning N_Port WWN N_Port FC-ID Fx_Port WWN Fx_Port WWN and interface index Fx_Port domain ID and interface index Fx_Port domain ID and port number LUN Read-only Broadcast Fibre Channel Security Protocol (FC-SP) DH-CHAP switch-switch authentication DH-CHAP host-switch authentication Port security and fabric binding Management access SSHv2 implementing AES SNMPv3 implementing AES SFTP Management Access methods Access methods through Cisco MDS 9500 Series Supervisor Module Out-of-band 10/100 Ethernet port (Supervisor-1) Out-of-band 10/100/1000 Ethernet port (Supervisor-2) RS-232 serial console port In-band IP over Fibre Channel DB-9 COM port Access methods through Cisco MDS 9000 Family Fibre Channel Switching Module In-band FICON CUP over Fibre Channel Access protocols CLI by console and Ethernet ports SNMPv3 by Ethernet port and in-band IP over Fibre Channel access Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S) FICON CUP Device alias Distributed Device Alias service Network security Per-VSAN role-based access control using RADIUS-based and TACACS+-based authentication, authorization, and accounting (AAA) functions SFTP SSHv2 implementing AES SNMPv3 implementing AES Management applications Cisco MDS 9000 Family CLI Cisco Fabric Manager Cisco Device Manager CiscoWorks Resource Manager Essentials (RME) and Device Fault Manager (DFM) Programming interface Scriptable CLI Fabric manager GUI Device manager GUI Software Software compatibility Cisco MDS SAN-OS Release 3.0(1) or later Compatibility Product compatibility Cisco MDS 9000 Family Fibre Channel protocols Fibre Channel standards 10GFC, Revision 4.0 (ANSI/INCITS 364:2003) FC-PI-2, Revision 10 (ANSI/INCITS 404-2006) FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) FC-FS-2, Revision 0.91 FC-LS, Revision 1.2 FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001) FC-SW-3, Revision 6.6 (ANSI/INCITS 384-2004) FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006) FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001) FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004) FC-GS-5, Revision 8.2 FC-BB, Revision 4.7 (ANSI/INCITS 342-2001) FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003) FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006) FCP, Revision 12 (ANSI/INCITS 269-1996) FCP-2, Revision 8 (ANSI/INCITS 350-2003) FCP-3, Revision 4 (ANSI/INCITS 416-2006) FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001) FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003) FC-VI, Revision 1.84 (ANSI/INCITS 357-2002) FC-FLA, Revision 2.7 (INCITS TR-20-1998) FC-PLDA, Revision 2.1 (INCITS TR-19-1998) FC-Tape, Revision 1.17 (INCITS TR-24-1999) FC-MI, Revision 1.92 (INCITS TR-30-2002) FC-MI-2, Revision 2.6 (INCITS TR-39-2005) FC-DA, Revision 3.1 (INCITS TR-36-2004) FC-SP, Revision 1.74 FAIS, Revision 0.7 IP over Fibre Channel (RFC 2625) IPv6, IPv4 and ARP over Fibre Channel (RFC 4338) Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs Class of Service: Class 2, Class 3, Class F Fibre Channel standard port types: E, F, FL, B Fibre Channel enhanced port types: SD, ST, TE Diagnostics and Troubleshooting Tools Tools Power-on-self-test (POST) diagnostics Online diagnostics Internal port loopbacks Switch Port Analyzer (SPAN) and Remote SPAN (RSPAN) Fibre Channel Traceroute Fibre Channel Ping Fibre Channel Debug Cisco Fabric Analyzer Syslog Online system health Port-level statistics Real Time Protocol Debug RAS Features Reliability and availability Hot-swappable module Hot-swappable X2 optics Online diagnostics Stateful Process Restart Non-disruptive Supervisor Failover Any module, any port configuration for PortChannels Fabric-based multipathing Per-VSAN fabric services Port Tracking Virtual Routing Redundancy Protocol (VRRP) for management Serviceability Configuration file management Non-disruptive software upgrades for Fibre Channel interfaces Call Home Power-management LEDs Port beaconing System LED SNMP traps for alerts Network boot Environmental Ambient operating temperature 32 to 104°F (0 to 40°C) Ambient non-operating temperature and storage -40 to 167°F (-40 to 75°C) Relative humidity, ambient (non-condensing) operating 10 to 90% Relative humidity, ambient (non-condensing) non-operating and storage 10 to 95% Altitude, operating -197 to 6500 ft (-60 to 2000 m) Physical dimensions Dimensions (H x W x D): 1.75 x 14.4 x 16 in (3.0 x 35.6 x 40.6 cm) Occupies one slot in a Cisco MDS 9200 Series or MDS 9500 Series chassis Weight 11.00 lb (4.95 kg) Regulations Safety CE Marking UL 60950 CAN/CSA-C22.2 No. 60950 EN 60950 IEC 60950 TS 001 AS/NZS 3260 IEC60825 EN60825 21 CFR 1040 EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN 55022 Class A CISPR 22 Class A AS/NZS 3548 Class A VCCI Class A EN 55024 EN 50082-1 EN 61000-6-1 EN 61000-3-2 EN 61000-3-3 Warranty Duration 2 years HW coverage hours 24 x 7 HW response times 4 hours* *average response times, response times may vary by country Delivery method On-site HW phone coverage 24 x 7

Print-friendly Page Download Collateral Cisco MDS 9000 Product Family at a Glance Data Center Solutions - Roadmap to Data Replication & Disaster Recovery Related Optional Cisco Software Licenses Cisco MDS 9216A Multilayer Fabric Switch Cisco MDS 9216i Multilayer Fabric Switch Cisco MDS 9509 Multilayer Director Cisco MDS 9513 Multilayer Director