The Cisco MDS 9000 18/4-Port Multiservice Module is ideal for mission-critical enterprise SANs that require secure, robust, cost-effective disaster recovery and business continuity services. The module delivers outstanding SAN extension performance, minimizing latency for disk and tape with FCIP acceleration features.
1, 2, and 4 Gb/sec auto-sensing, optionally configurable
Buffer credits
16 per port (shared-mode ports), up to 250 per port (dedicated-mode ports), and up to 4095 on an individual port (dedicated-mode ports with optional Cisco MDS 9000 Family Enterprise Package license activated)
PortChannel
Up to 16 physical links
FCIP tunnels
Up to 3 per port
Supported optics, media, and transmission distances
Optics Media Distance
1 Gb/sec-SW, LC SFP
50/125-micron multimode (OM3)
860 m
1 Gb/sec-SW, LC SFP
50/125-micron multimode
500 m
1 Gb/sec-SW, LC SFP
62.5/125-micron multimode
300 m
1 Gb/sec-LW, LC SFP
9/125-micron single-mode
10 km
2 Gb/sec-SW, LC SFP
50/125-micron multimode
500 m
2 Gb/sec-SW, LC SFP
50/125-micron multimode
300 m
2 Gb/sec-LW, LC SFP
62.5/125-micron multimode
150 m
2 Gb/sec-LW, LC SFP
9/125-micron single-mode
10 km
4 Gb/sec-LW, LC SFP
50/125-micron multimode (OM3)
380 m
4 Gb/sec-SW, LC SFP
50/125-micron multimode
150 m
4 Gb/sec-SW, LC SFP
62.5/125-micron multimode
70 m
4 Gb/sec-MR, LC SFP
9/125-micron single-mode
4 km
4 Gb/sec-LW, LC SFP
9/125-micron single-mode
10 km
IP over Fibre Channel (RFC 2625)
IPv6, IPv4 and ARP over FC (RFC 4338)
Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs
IP standards
RFC 791 IPv4
RFC 793, 1323 TCP
RFC 894 IP/Ethernet
RFC 1041 IP/802
RFC 792, 950, 1256 ICMP
RFC 1323 TCP performance enhancements
RFC 2338 VRRP
RFC 2460, 4291 IPv6
RFC 2463 ICMPv6
RFC 2461, 2462 IPv6 neighbor discovery and stateless auto-configuration
RFC 2464 IPv6/Ethernet
RFC 3270, 3980 iSCSI
RFC 3643, 3821 FCIP
Ethernet standards
IEEE 802.3-2005 Ethernet
IEEE 802.1Q-2005 VLAN
IPsec
RFC 2401, 4301 Security Architecture for IP
RFC 2403, 2404 HMAC
RFC 2405, 2406, 2451, 4303 IP ESP
RFC 2407, 2408 ISAKMP
RFC 2412 OAKLEY Key Determination Protocol
RFC 3566, 3602, 3686 AES
Internet Key Exchange (IKE)
RFC 2409 IKEv1
RFC 4306 IKEv2
Diagnostics and Troubleshooting Tools
Tools
Power-on-self-test (POST) diagnostics
Online diagnostics
Internal port loopbacks
Switch Port Analyzer (SPAN) and Remote SPAN (RSPAN)
Fibre Channel Traceroute
Fibre Channel Ping
Fibre Channel Debug
Cisco Fabric Analyzer
Syslog
Online system health
Port-level statistics
Real Time Protocol Debug
RAS Features
Reliability and availability
Hot-swappable module
Hot-swappable SFP optics
Online diagnostics
Stateful Process Restart
Any module, any port configuration for PortChannels
Fabric-based multipathing
Per-VSAN fabric services
Port Tracking
Virtual Routing Redundancy Protocol (VRRP) for management and FCIP or iSCSI connections
Relative humidity, ambient (non-condensing) non-operating and storage
10 to 95%
Altitude, operating
-197 to 6500 ft (-60 to 2000 m)
Physical dimensions
Dimensions (H x W x D):
1.75 x 14.4 x 16 in (3.0 x 35.6 x 40.6 cm)
Occupies one slot in a Cisco MDS 9200 Series or MDS 9500 Series chassis
Weight
Cisco MDS 9000 Family 18/4 Multiservice Module only: 7.75 lb (3.5 kg)
Regulations
Safety
CE Marking
UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
TS 001
AS/NZS 3260
IEC60825
EN60825
21 CFR 1040
EMC
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 55024
EN 50082-1
EN 61000-6-1
EN 61000-3-2
EN 61000-3-3
FIPS
140-2 Level 3 (for Multiservice FIPS Module-DS-X9304-18FK9)
Warranty
Duration
1 year
HW coverage hours
8 x 8
HW response times
4 hours*
*average response times, response times may vary by country