|
Physical Specifications: 12-slot Director
|
|---|
|
Height
|
43 in. (1092.2 mm)
|
|
|
Width
|
23.6 in. (599.4 mm)
|
|
|
Depth
|
36.2 in. (918.8 mm)
|
|
|
Weight
|
400 lbs. (181 kg)
|
|
|
AC voltage
|
90-240 VAC
|
|
|
Hertz
|
47-63 Hz
|
|
|
Phases
|
1
|
|
|
Maximum amps
|
110V/21A
220V/10.5A
208V/11.5A
|
|
|
Maximum operating VA
|
2090 VA
|
|
Physical Specifications: 6-slot Director
|
|---|
|
Height
|
19.25 in. (489 mm)
|
|
|
Width
|
23.6 in. (599.4 mm)
|
|
|
Depth
|
27.75 in. (705 mm)
|
|
|
Weight
|
200 lbs. (90.7 kg)
|
|
|
AC voltage
|
90-240 VAC
|
|
|
Hertz
|
47-63 Hz
|
|
|
Phases
|
1
|
|
|
Maximum amps
|
110V/10.5A
220V/5.25A
208V/5.75A
|
|
|
Maximum operating VA
|
Maximum operating VA
|
|
Physical Specifications: 6/12-slot Director
|
|---|
|
Input power requirements
|
90-240 VAc, 47-63 Hz
|
|
|
Operating temperature
|
40°F –104°F (5°C –40°C)
|
|
|
Operational relative humidity
|
5% to 80% (non-condensing)
|
|
|
Air flow
|
450 CFM (214 liters/second)
|
|
|
ESCON specifications
|
IBM's Enterprise Systems connection Architecture
Cable type: Optical multi-mode
Core diameter: 50 microns or 62.5 microns
Cladding diameter: 125 microns
Connector type: Multi-mode duplex ESCON connector
|
|
|
Bus and Tag specifications
|
- Compliant with OEMI FIPS-60 specification for Bus and Tag connectivity
- Block Multiplexor (Byte Multiplexor connectivity is not supported)
- Fibre Channel/FICON specifications
- Designed to meet FcIP, Fc, Fc-2 Fc-BB-2, and Fc-SB2 standards/emerging standards
|
|
|
Multi-mode/Short wave
|
|
|
|
Cable type
|
Optical multi-mode
|
|
|
Core diameter
|
62.5 microns and 50 microns
|
|
|
Cladding diameter
|
125 microns
|
|
|
Numerical aperture
|
0.275
|
|
|
Attenuation (Max.)
|
1.5 dB/km @ 1310 nm
3.75 dB/km @ 850 nm
|
|
|
Operational wavelength
|
850 nm
|
|
|
Bandwidth (Min.)
|
160 MHz/km
|
|
|
Fiber count
|
Duplex
|
|
|
Length (Max.)
|
50 microns = 500 meters@ 100 MB/sec
50 microns = 300 meters@ 200 MB/sec
62.5 microns = 250 meters @ 100 MB/sec
62.5 microns = 120 meters @ 200 MB/sec
|
|
|
Connector type
|
Duplex LC
|
|
|
Line rate (Max.)
|
1.062 Gb/sec
|
|
|
Output power
|
-5 dBm
|
|
|
Receiver sensitivity
|
-18 dBm
|
|
|
Input power (Max.)
|
0 dBm
|
|
|
Cable type
|
Optical single mode
|
|
|
Core diameter
|
9 microns
|
|
|
Cladding diameter
|
125 microns
|
|
|
Wavelength
|
1310 nm
|
|
|
Maximum distance
|
10 km
|
|
|
Connector type
|
Duplex LC
|
|
|
Line rate (Max.)
|
1.062 Gbit/sec
|
|
|
Output Power
|
-6 dBm
|
|
|
Receiver sensitivity
|
-17 dBm
|
|
|
Input power (Max.)
|
-5 dBm
|
|
|
Ethernet 10/100 specifications
|
The Brocade USD-X supports IEEE 802.3, ANSI 8802-3 Ethernet 10/100
standards.
Cable type: CAT5 UTP
Line rate: 100 Mb/sec
Connector type: RJ-45
|
|
|
Gigabit Ethernet specifications
|
Supports full duplex Ethernet on each port and is designed to meet the
following standards:
- IEEE 802.3z/802.3ab Gigabit Ethernet Standard
- IEEE 802.3x flow control
- IEEE 802.1p packet priority
|
|
|
Multi-mode/Short wave
|
|
|
|
Cable type
|
Multi-mode Fibre
|
|
|
Core diameter
|
50/62.5 micron
|
|
|
Cladding diameter
|
125 micron
|
|
|
Operational wavelength
|
850 nm
|
|
|
Line rate
|
1.25 Gb/sec
|
|
|
Distance
|
550 m – 50/125
300 m – 62.5/125
|
|
|
Output power
|
-5 dBm
|
|
|
Receiver sensitivity
|
-20 dBm
|
|
|
Input power (Max.)
|
0 dBm
|
|
|
Connector type
|
Duplex LC
|
|
|
Additional specifications
|
For additional information see data sheet
|
