Brocade Mi10K Director

Brocade Mi10K Director

Specifications

No Longer Orderable

The Brocade Mi10K Director provides you with the most capable, flexible, and robust switching solution for enterprise environments. SAN LPARs and OPEN VSAN technology enable safe and effective consolidation, and the advanced security and diagnostic tools reduce risk and increase uptime.


Key Specifications

  • 1, 2, 4, and 10 Gb/sec port speeds
  • 256 ports per chassis
  • Supports Fibre Channel and FICON
  • 14 RU chassis
Performance
Port speed 1, 2, 4 and 10 Gb/sec at full duplex

Open Trunking heterogeneous load balancing

RSCN filtering
Scalability
Ports per chassis 256 ports
239 Fibre Channel domain addressing
Availability and Serviceability
High-availability features 99.999%
Hot-plug, redundant power supplies, fans, processors, switch cards
Hot-plug optics, port modules
Online diagnostics
HotCAT (hot code activation technology) technology for online, non-disruptive firmware load and activation
Port fencing
Predictive optics monitoring
Safe zoning mode

Serviceability HotCAT
Call-home, e-mail (with McDATA software)
FRU beaconing
Compatibility
Fibre Channel protocols Fc-PH, Fc-PH-2, Fc-PH-3, Fc-GS-2, Fc-GS-3, Fc-FLA, Fc-FG, Fc-Mi, Fc- SW, Fc-SW-2, 10GFc, Fc-FS, Fc-Pi, Fc-SB-2, Fc-SB-3

Fibre Channel Element MIB FE-MIB

TCP-IP MIB-II groups System, interface, Address Translation, IP, ICMP, TCP, UDP, SNMP

Fibre Channel classes of service Class 2, 3, F
Supported Optical Media
Media type Hot-plug, industry standard LC Small Form Factor

Shortwave (2 Gb/sec and 4 Gb/sec) 150 m (492 ft) at 4 Gb/sec
300 m (984 ft) at 2 Gb/sec

Longwave (2 Gb/sec and 4 Gb/sec) 4 km (2.4 mi) at 4 Gb/sec
10 km (6.2 mi) at 2,4 Gb/sec
35 km (21.7 mi) at 2 Gb/sec
80 km (49.7 mi) at 2 Gb/sec

Dist. w/repeaters (2 Gb/sec and 4 Gb/sec) Up to 100 km (62 mi) at 4 Gb/sec

Shortwave (10 Gb/sec) 82 m (269 ft) with OM2 cable
300 m (1,148 ft) with OM3 cable

Longwave (10 Gb/sec) 10 km (6.2 mi)
35 km (21.7 mi)

Dist. w/repeaters (10 Gb/sec) Up to 190 km (117 mi)
Management
Management options Heterogeneous Enterprise Fabric Connectivity Manager (EFCM)
SNMP v1/2/3
CLi – Telnet, SSH, SSHv2
FICON Management Server (CUP)
Inband Management (OSMS)
RSCN Filtering

Virtual Director SAN LPARs
OPEN VSANs

Security SAN LPAR hard partitioning
Password Authentication
Radius Support
Security Log
Log-in banner
E/F port authentication
CHAP authentication
SSHv2
IP ACLs
SSH
SSL
SNMP v3
Port, switch and fabric binding

Fabric services Simple Name Server
Management Server
Fabric Config Server
Unzoned Name Server
Fabric Zone Server
FICON CUP Server
Fabric Login Server
Fabric Controller
Domain Controller

Diagnostics Power-on self test
Internal and external loopback
Online system health
Fibre Channel ping
Hot device detection
Predictive optics
Traceroute
Global Name Services display
Route table display
Mechanical
Install options Rack mountable, Brocade cabinet rack

Height 67.2 cm (24.5 in. 14U)

Width 44.3 cm (17.5 in.)

Depth 86.4 cm (34 in.)

Weight 152.0 kg (335 lbs.)
Environmental
Non-operating temperature 0° C to 60° C (32° F to 140° F)

Non-operating humidity 5%–80%

Max. non-operating altitude 12,192 m (40,000 ft.)

Operating temperature 0° C to 40° C (32° F to 104° F)

Operating humidity 8%–80%

Max. operating altitude 3,048 m (10,000 ft.)
Power
Operating voltage 200 - 240 VAC

AMPs (max) 12 AMPS @ 208 VAC

Watts 2500 Watts

Heat output 8,533 BTU/hr
Regulatory Compliance
Safety and Emissions Meets safety and emission requirements CB, CE, UlcUL, UL Ar+S, GS, GOST, NOM, AUS NZ, FCCA statement, Canadian statement, MIC mark, FCCI Demko
Warranty
Duration 1 year

HW coverage hours Extended Business Hours

HW response times 4 hour, Same Business Day*

*average response times, response times may vary by country

Delivery method Onsite

HW phone coverage 24 x 7