Cisco MDS 9222i Multiservice Modular Switch

Cisco MDS 9222i MMS

Get it

From $40,595.00 (US)

Specifications

With a compact form factor, a modular expansion slot, and advanced capabilities normally found only on director-class switches, the affordable MDS 9222i is an ideal solution for departmental and remote office SANs.


Key Specifications

  • Scales up to 66 FC ports
  • 18 4 Gb/sec FC interfaces for high-performance SAN connectivity
  • 4 Gigabit Ethernet IP storage services ports
  • Supports iSCSI, FC, and FICON
Systems Architecture
Port speed 4, 2, and 1 Gb/sec autosensing, optionally configurable

Buffer credits 16 per port (shared-mode ports), up to 250 per port (dedicated-mode ports), and up to 4095 on an individual port (dedicated-mode ports with optional Cisco MDS 9000 Family Enterprise Package license activated)

Ports per chassis 18 to 66 Fibre Channel ports and up to 12 1 Gb/sec Ethernet ports

Ports per rack Up to 980

PortChannel Up to 16 physical links

FCIP tunnels Up to 3 per port

Cards, Ports, and Slots Base: 18 fixed autosensing 1/2/4-Gbps Fibre Channel ports and 4 fixed 1 Gb/sec Ethernet ports

Expansion: 1 empty expansion slot with support for the following:
Cisco 12-, 24-, and 48-port 4 Gb/sec Fibre Channel Switching Modules
Cisco MDS 9000 Family 4-port 10 Gb/sec Fibre Channel Switching Module
Cisco MDS 9000 Family 18/4-port Multiservice Module
Cisco MDS 9000 Family 18/4-port Multiservice FIPS Module with FIPS 140-2 Level 3 validation
Cisco MDS 9000 Family 32-Port SSM
Cisco MDS 9000 Family 8-Port IP Storage Services Module

Fabric services Name server
Internet Storage Name Server (iSNS)
Registered state change notification (RSCN)
Login services
Fabric Configuration Server (FCS)
Public loop
Broadcast
In-order delivery

FICON FC-SB-3 compliant
Cascaded FICON fabrics
Intermix of FICON and Fibre Channel Protocol traffic
CUP management interface

Advanced services VSAN
IVR
PortChannel with multipath load balancing
Flow-based and zone-based QoS
Fibre Channel Congestion Control
FCIP Tape Read and Write Acceleration
Cisco MDS SME

Network security VSANs
ACLs
Per-VSAN RBAC
Fibre Channel zoning
N_Port World Wide Name (WWN)
N_Port FC-ID
Fx_Port WWN
Fx_Port WWN and interface index
Fx_Port domain ID and interface index
Fx_Port domain ID and port number
LUN
Read-only
Broadcast
iSCSI zoning
iSCSI name
IP address
FC-SP
DH-CHAP switch-to-switch authentication
DH-CHAP host-to-switch authentication
Port security and fabric binding
IPsec for FCIP and iSCSI
IKEv1 and IKEv2
Management access
SSHv2 implementing AES
SNMPv3 implementing AES
SFTP
Management
Access methods Out-of-band 10/100 Ethernet port
RS-232 serial console port
In-band IP over Fibre Channel
DB-9 COM port
In-band FICON CUP over Fibre Channel

Access protocols CLI using the console and Ethernet ports
SNMPv3 using the Ethernet port and in-band IP over Fibre Channel access
Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S)
FICON CUP

Device alias Distributed Device Alias service

Network security Per-VSAN RBAC using RADIUS and TACACS+-based authentication, authorization, and accounting (AAA) functions
SFTP
SSHv2 implementing AES
SNMPv3 implementing AES

Management applications Cisco MDS 9000 family CLI
Cisco Fabric Manager
Cisco Device Manager
CiscoWorks Resource Manager Essentials (RME) and Device Fault Manager (DFM)

Programming interface Scriptable CLI
Cisco Fabric Manager GUI
Cisco Device Manager GUI
Software
Minimum software requirement Cisco MDS 9000 SAN-OS Release 3.2(1) or later
Compatibility
Fibre Channel protocols FC-PH, Revision 4.3 (ANSI INCITS 230-1994)
FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996)
FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999)
FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997)
FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998)
FC-PI, Revision 13 (ANSI INCITS 352-2002)
FC-PI-2, Revision 10 (ANSI INCITS 404-2006)
10GFC, Revision 4.0 (ANSI INCITS 364-2003)
10GFC, Amendment 1 (ANSI INCITS 364-2003/AM1-2007)
FC-FS, Revision 1.9 (ANSI INCITS 373-2003)
FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007)
FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007)
FC-LS, Revision 1.62 (ANSI INCITS 433-2007)
FC-AL, Revision 4.5 (ANSI INCITS 272-1996)
FC-AL-2, Revision 7.0 (ANSI INCITS 332-1999)
FC-AL-2, Amendment 1 (ANSI INCITS 332-1999/AM1-2003)
FC-AL-2, Amendment 2 (ANSI INCITS 332-1999/AM2-2006)
FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001)
FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004)
FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006)
FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001)
FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004)
FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007)
FC-BB, Revision 4.7 (ANSI INCITS 342-2001)
FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003)
FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006)
FCP, Revision 12 (ANSI INCITS 269-1996)
FCP-2, Revision 8 (ANSI INCITS 350-2003)
FCP-3, Revision 4 (ANSI INCITS 416-2006)
FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001)
FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003)
FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007)
FC-VI, Revision 1.84 (ANSI INCITS 357-2002)
FC-SP, Revision 1.8 (ANSI INCITS 426-2007)
FAIS, Revision 1.03 (ANSI INCITS 432-2007)
FC-FLA, Revision 2.7 (INCITS TR-20-1998)
FC-PLDA, Revision 2.1 (INCITS TR-19-1998)
FC-Tape, Revision 1.17 (INCITS TR-24-1999)
FC-MI, Revision 1.92 (INCITS TR-30-2002)
FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
FC-DA, Revision 3.1 (INCITS TR-36-2004)
Class of Service: Class 2, Class 3, Class F
Fibre Channel standard port types: E, F, FL, B
Fibre Channel enhanced port types: SD, ST, TE
IP over Fibre Channel (RFC 2625)
IPv6, IPv4 and ARP over Fibre Channel (RFC 4338)
Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs
Diagnostics and Troubleshooting Tools
Tools Power-on self-test (POST) diagnostics
Online diagnostics
Internal port loopbacks
SPAN and Remote SPAN (RSPAN)
Fibre Channel Traceroute
Fibre Channel Ping
Fibre Channel Debug
Cisco Fabric Analyzer
Syslog
Online system health
Port-level statistics
Real-Time Protocol (RTP) Debug
RAS
Reliability and Availability ISSU
Hot-swappable, 1+1 redundant power supplies
Hot-swappable fan tray with integrated temperature and power management
Hot-swappable Small Form-Factor Pluggable (SFP) optics
Hot-swappable switching module
Passive backplane
Stateful process restart
Any module and any port configuration for PortChannels
Fabric-based multipathing
Per-VSAN fabric services
Port tracking
VRRP for management and FCIP or iSCSI connections
Online diagnostics

Serviceability Configuration file management
ISSU for Fibre Channel interfaces
Power-management LEDs
Port beaconing
System LED
SNMP traps for alerts
Network boot
Environmental
Ambient operating temperature 32 to 104°F (0 to 40°C)

Ambient non-operating temperature -40 to 158°F (-40 to 70°C)

Relative humidity, ambient (noncondensing) operating 10 to 90%

Relative humidity, ambient (noncondensing) nonoperating and storage 10 to 95%

Altitude, operating -197 to 6500 ft (-60 to 2000 m)

Physical dimensions (H x W x D)
5.25 x 17.32 x 22.66 in. (13.34 x 43.99 x 57.56 cm), 3RUs (all units rack mountable in standard 19-inch Electronic Industries Alliance [EIA] rack)

Weight Fully configured chassis with optional switching module: 62 lb (28.2 kg)
Power and Cooling
Power supply 845W AC

AC Input 100 to 240V AC nominal (10% range)
50 to 60 Hz (nominal)

Airflow 200 linear feet per minute (LFM) through system fan assembly

Cisco recommends maintaining a minimum air space of 2.5 in. (6.4 cm) between walls and chassis air vents and a minimum horizontal separation of 6 in. (15.2 cm) between two chassis to prevent overheating
Regulations
Safety CE Marking
UL 60950 -1
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
TS 001
AS/NZS 3260
IEC 60825
EN 60825
21 CFR 1040

EMC FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN55024
EN50082-1
EN61000-6-1
EN61000-3-2
EN61000-3-3
FIPS
140-2 Level 3 (for Multiservice FIPS Module -- DS-X9304-18FK9)
Warranty
Duration 1 year

HW coverage hours 8 x 8

HW response times 4 hours*

*average response times, response times may vary by country

Delivery method On-site

HW phone coverage 8 x 8