|
Systems Architecture
|
|---|
|
Port speeds
|
Supported Fibre Channel port speeds
- 1, 2 Gb/sec auto-sensing, optionally configurable
- 1, 2, 4 Gb/sec auto-sensing, optionally configurable
- 10 Gb/sec fixed rate
Supported Ethernet port speeds
|
|
|
Buffer credits
|
Buffer credits: 16-port and 32-port modules
Buffer credits: multiprotocol services module
- Up to 255 per Fibre Channel port standard
- Up to 3500 on an individual port with optional Enterprise License activation
Buffer credits: 12-port, 24-port, and 48-port modules
- Up to 250 per port standard
- Up to 4095 on an individual port with optional Enterprise License activation
|
|
|
Ports per chassis
|
- 12 to 336 1, 2, 4 Gb/sec Fibre Channel ports
- 4 to 44 10 Gb/sec Fibre Channel ports
- 4 to 60 1 Gb/sec Ethernet ports
|
|
|
Ports per rack
|
- Up to 1008 1, 2, 4 Gb/sec Fibre Channel ports
- Up to 672 1, 2 Gb/sec auto-sensing Fibre Channel ports
- Up to 84 10 Gb/sec Fibre Channel ports
- Up to 144 1 Gb/sec Ethernet ports
|
|
|
PortChannel
|
Up to 16 ports (the channel can span any speed-matched port on any module in the chassis)
|
|
|
Fabric services
|
- Name server
- Registered State Change Notification (RSCN)
- Login services
- Fabric Configuration Server (FCS)
- Public loop
- Broadcast
- In-order delivery
|
|
|
FICON
|
- FC-SB-3 compliant
- Cascaded FICON fabrics
- Intermix of FICON and Fibre Channel FCP traffic
- CUP management interface
|
|
|
Advanced functionality
|
- VSAN
- Inter-VSAN Routing
- PortChannel with Multipath Load Balancing
- QoS-flow-based, zone-based
- Fibre Channel Congestion Control
- N_Port ID virtualization
|
|
|
Network security
|
- VSANs
- Access control lists
- Per-VSAN role-based access control
- Fibre Channel zoning
- N_Port WWN
- N_Port FC-ID
- Fx_Port WWN
- Fx_Port WWN and interface index
- Fx_Port domain ID and interface index
- Fx_Port domain ID and port number
- LUN
- Read-only
- Broadcast
- Fibre Channel Security Protocol (FC-SP)
- DH-CHAP switch-switch authentication
- DH-CHAP host-switch authentication
- Port security and fabric binding
- Management access
- SSHv2 implementing AES
- SNMPv3 implementing AES
- SFTP
|
|
Management
|
|---|
|
Access methods
|
Access methods through Cisco MDS 9500 Series Supervisor Module
- Out-of-band 10/100 Ethernet port (Supervisor-1 Module)
- Out-of-band 10/100/1000 Ethernet port (Supervisor-2 Module)
- RS-232 serial console port
- In-band IP-over-Fibre Channel
- DB-9 COM port
Access methods through Cisco MDS 9000 Family Fibre Channel Switching Module
- In-band FICON-CUP over-Fibre Channel
|
|
|
Access protocols
|
- CLI-via console and Ethernet ports
- SNMPv3-via Ethernet port and in-band IP over-Fibre Channel access
- Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S)
- FICON CUP
|
|
|
Device alias
|
Distributed Device Alias service
|
|
|
Network security
|
- Per-VSAN role-based access control using RADIUS-based and TACACS+-based authentication, authorization, and accounting (AAA) functions
SFTP
- SSHv2 implementing AES
- SNMPv3 implementing AES
|
|
|
Management applications
|
- Cisco MDS 9000 Family CLI
- Cisco Fabric Manager
- Cisco Device Manager
- CiscoWorks Resource Manager Essentials (RME) and Device Fault Manager (DFM)
|
|
|
Programming interface
|
- Scriptable CLI
- Fabric manager GUI
- Device manager GUI
|
|
Software
|
|---|
|
Software compatibility
|
Cisco MDS SAN-OS Release 1.0 or later
|
|
Compatibility
|
|---|
|
Fibre Channel protocols
|
Fibre Channel standards
- FC-PH, Revision 4.3 (ANSI/INCITS 230-1994)
- FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996)
- FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999)
- FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997)
- FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998)
- FC-PI, Revision 13 (ANSI/INCITS 352-2002)
- FC-PI-2, Revision 10 (ANSI/INCITS 404-2006)
- FC-FS, Revision 1.9 (ANSI/INCITS 373-2003)
- FC-FS-2, Revision 0.91
- FC-LS, Revision 1.2
- FC-AL, Revision 4.5 (ANSI/INCITS 272-1996)
- FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999)
- FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003)
- FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006)
- FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001)
- FC-SW-3, Revision 6.6 (ANSI/INCITS 384-2004)
- FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006)
- FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001)
- FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)
- FC-GS-5, Revision 8.2
- FC-BB, Revision 4.7 (ANSI/INCITS 342-2001)
- FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003)
- FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006)
- FCP, Revision 12 (ANSI/INCITS 269-1996)
- FCP-2, Revision 8 (ANSI/INCITS 350-2003)
- FCP-3, Revision 4 (ANSI/INCITS 416-2006)
- FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001)
- FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003)
- FC-VI, Revision 1.84 (ANSI/INCITS 357-2002)
- FC-FLA, Revision 2.7 (INCITS TR-20-1998)
- FC-PLDA, Revision 2.1 (INCITS TR-19-1998)
- FC-Tape, Revision 1.17 (INCITS TR-24-1999)
- FC-MI, Revision 1.92 (INCITS TR-30-2002)
- FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
- FC-SP, Revision 1.6
- FC-DA, Revision 3.1 (INCITS TR-36-2004)
- FAIS, Revision 0.7
IP over Fibre Channel (RFC 2625)
IPv6, IPv4 and ARP over FC (RFC 4338)
Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs
Class of Service: Class 2, Class 3, Class F
Fibre Channel standard port types: E, F, FL, B
Fibre Channel enhanced port types: SD, ST, TE
|
|
|
Chassis slot configuration
|
- Module slots: 7
- Supervisor slots: 2
- Fan tray: front fan tray
- Power supply bays: 2
|
|
Diagnostics and Troubleshooting Tools
|
|---|
|
Tools
|
- Power-on-self-test (POST) diagnostics
- Online diagnostics
- Internal port loopbacks
- Switch Port Analyzer (SPAN) and Remote SPAN (RSPAN)
- Fibre Channel Traceroute
- Fibre Channel Ping
- Fibre Channel Debug
- Cisco Fabric Analyzer
- Syslog
- Online system health
- Port-level statistics
- Real Time Protocol Debug
|
|
RAS Features
|
|---|
|
Reliability and availability
|
- Online, non-disruptive software upgrades
- Stateful non-disruptive supervisor module failover
- Hot swappable redundant supervisor modules
- Hot swappable 1+1 redundant power
- Hot-swappable fan tray with integrated temperature and power management
- Hot swappable small form-factor pluggable (SFP) optics
- Hot swappable small pluggable (X2) optics (10 Gb/sec)
- Hot swappable switching modules
- Stateful process restart
- Any module, any port configuration for PortChannels
- Fabric-based multipathing
- Per VSAN fabric services
- Online diagnostics
- Port tracking
- Virtual Routing Redundancy Protocol (VRRP) for management
|
|
|
Serviceability
|
- Configuration file management
- Non-disruptive software upgrades for Fibre Channel interfaces
- Power-management LEDs
- Port beaconing
- System LED
- SNMP traps for alerts
- Network boot
|
|
Environmental
|
|---|
|
Ambient operating temperature
|
32 to 104°F (0 to 40°C)
|
|
|
Ambient non-operating temperature
|
40 to 167°F (-40 to 75°C)
|
|
|
Relative humidity, ambient (non-condensing) operating
|
10 to 90%
|
|
|
Relative humidity, ambient (non-condensing) non-operating and storage
|
10 to 95%
|
|
|
Altitude, operating
|
-197 to 6500 ft (-60 to 2000 m)
|
|
|
Physical dimensions
|
Dimensions (H x W x D):
24.5 x 17.37 x 18.4 in (62.3 x 44.1 x 46.8 cm)-14 RU
|
|
|
Weight
|
- Chassis (includes fans and clock modules): 55 lb (25 kg)
- Chassis fully configured with two supervisor/fabric modules, seven switching modules, and two 3000 W power supplies: 170 lb (78 kg)
|
|
Power and Cooling
|
|---|
|
Power supplies
|
- Input: 100-240V AC nominal (±10% for full range); 16A maximum; 50-60 Hz nominal (±3 Hz for full range)
- Output: 1400W (100V AC at 16A); 3000W (200V AC at 16A)
|
|
|
Airflow
|
- 300 linear feet per minute (lfm) through system fan assembly
It is recommended that you maintain a minimum air space of 2.5 inches (6.4 cm) between walls and chassis air vents and a minimum horizontal separation of 6 inches (15.2 cm) between two chassis to prevent overheating.
|
|
Regulations
|
|---|
|
Safety
|
CE Marking
UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
TS 001
AS/NZS 3260
IEC60825
EN60825
21 CFR 1040
|
|
|
EMC
|
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 55024
EN 50082-1
EN 61000-6-1
EN 61000-3-2
EN 61000-3-3
|
|
Warranty
|
|---|
|
Duration
|
2 years
|
|
|
HW coverage hours
|
24 x 7
|
|
|
HW response times
|
4 hours*
*average response times, response times may vary by country
|
|
|
Delivery method
|
On-site
|
|
|
HW phone coverage
|
24 x 7
|
