|
Performance
|
|---|
|
Throughput per hour, native (uncompressed)
|
- LTO 3 (18 drives; 68-80 MB/sec) - over 5 TB/hr
- LTO 4 (18 drives; 120 MB/sec) – over 7 TB/hr
- SDLT 600 (18 drives; 36 MB/sec) – over 2 TB/hr
|
|
Capacity
|
|---|
|
Capacity, native (uncompressed)
|
(maximum configuration 575 cartridges; mixed media - maximum configuration 494 cartridges)
- LTO 2 (200 GB/cart) - 115 TB
- LTO 3 (400 GB/cart) - 230 TB
- LTO 4 (800 GB/cart) – 460 TB
- SDLT 600 (300 GB/cart) - 148 TB
|
|
|
Number of cartridge slots
|
- 30-575 slots (LTO)
- 24-494 slots (Mixed Media)
- Base module: 50 total LTO cartridge slots, 42 total Mixed Media Slots
- Drive expansion module: 93 LTO slots, 77 Mixed Media slots
- Cartridge expansion module: 120 additional LTO cartridge slots; 98 additional slots Mixed Media (without CAP)
|
|
|
Number of tape drives
|
Base module: 1-2 drives
Expansion module: up to 4 drives
Total library: 1-18 drives
|
|
|
Cartridge access port (CAP) *
|
Base module, 5-cartridge capacity (LTO), 4-cartridge capacity (mixed media)
|
|
Availability
|
|---|
|
Mean exchanges/swaps between failure
|
2,000,000
|
|
|
Mean time to repair
|
< 30 min
|
|
|
Non-disruptive serviceability
|
Hot-swappable drives, Ethernet and serial ports for diagnostics and reporting. Redundant hot-swappable power supplies with redundant fans
|
|
Compatibility
|
|---|
|
Supported host platform
|
Solaris, UNIX, Windows, Linux
|
|
|
Robotics control interfaces
|
Robotics control interfaces Small Computer System Interface (SCSI)-3 Media Changer command set: low-voltage differential (LVD) or Fibre Channel
|
|
|
Any Cartridge Any Slot technology
|
Simultaneous non-partitioned support of multiple tape and media types
|
|
Management
|
|---|
|
Digital vision system
|
Unique digital vision camera system that performs continuous calibration and reads bar codes
|
|
|
Operator panel
|
Optional user-friendly configuration and diagnostic controls, status display and viewing window
|
|
|
Automatic clean
|
Configurable cleaning cartridge slot for tape drive cleaning by library or software command
|
|
|
Automatic self-discovery
|
Self-configuring for cells, drives and cartridge access ports
|
|
|
Continuous automation calibration
|
No periodic maintenance or alignment required
|
|
|
StorageTek Library Console (SLC)
|
Partitioning via SLC allows for up to 8 partitions by the cell, side or module. Reporting also available.
|
|
Mechanical
|
|---|
|
Base module (minimum configuration)
|
- Height: 14.0 in. (35.6 cm)
- Depth: 33.14 in. (81.1 cm)
- Width: 18.9 in. (48.0 cm)
- Unit height: 8u**
- Weight: 76.4 lb (34.56 kg)
|
|
|
Drive expansion module (minimum configuration)
|
- Height: 14.0 in. (35.6 cm)
- Depth: 33.14 in. (81.1 cm)
- Width: 18.9 in. (48.0 cm)
- Unit height: 8u**
- Weight: 59.0 lb (26.9 kg)
|
|
|
Cartridge expansion module (minimum configuration)
|
- Height: 14.0 in. (35.6 cm)
- Depth: 31.62 in. (80.3 cm)
- Width: 18.9 in. (48.0 cm)
- Unit height: 8u**
- Weight: 44.2 lb (20.1 kg)
|
|
Environmental
|
|---|
|
Temperature
|
- Operating: +50° to +104° F (+10° to 40° C)
- Non-operating: +50° to +104° F (+10° to 40° C)
|
|
|
Relative humidity
|
- Operating: 20% to 80%
- Non-operating: 10% to 95%
|
|
Power
|
|---|
|
Voltage
|
100–127 VAC, 200–240 VAC @ 50–60 Hz single phase (auto-ranging)
|
|
|
Library (operating max. continuous - not peak)
|
1.42 A @ 120 V or 0.75 A @ 240 V, 614 BTU/hr
|
|
|
Drives
|
Drive power consumption varies. Refer to individual drive specifications.
|
|
Regulatory compliance
|
|---|
|
Electromagnetic compatibility
|
FCC (47 CFR 15, Subpart B) Class A; CE (EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3); VCCI (CISPR 22) Class A;
Canada (ICES-003) Class A; Australia / New Zealand (AS/NZS CISPR22); Taiwan BSMI (CNS13438 Class A and CNS14336)
|
|
|
Safety
|
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN60950-1
|
|
Notes
|
|---|
|
*CAP slots can be configured as data cartridge slots
|
** Rack space is measured in height and expressed as a u. One u is 1.75 in (4.45 cm) in height
|
